IFM Reliability in: Design, Engineering, Manufacturing, and Service
Main » Panel-Style Air Intake » AFPI Inertial Spin Tue Aug 19 17:32:18 EDT 2008
Air Intake
Standard
Silencers
Closed Circuit
Panel-Style Air Intake
AFP One Stage
AFP Two Stage
AFPA Two Stage
AFPC Three Stage
AFPI Inertial Spin
Elements
New Elements
Rebuilding
Pressure Vessels
Air/Gas
Liquid
Coalescing
Vacuum
Mist Eliminators
Mist Eliminator
Knock-Out Pot
Information
Contact Us
Customer Login
Links
Map
Laser Cutting
Live Help (NEW!)
AFPI Inertial Spin Series Three STAGE Air Intake Filter/Silencer
Flow Rates To 40,000 SCFM
Efficiencies to 99.98 @ 10 microns

Designed for heavy dirt load environments where contaminates like flyash, dirt, and sand can be a problem for standard air intake filters. The AFPI series greatly increases the service life of second and third stage elements by removing the bulk of the contaminant and discharging it through bleed air duct.

 

Primary stage

element no. P078

 is a self-cleaning, highly corrosion resistant, polypropylene element providing an efficiency of 98% @ 15 microns.

 

 

How It Works

Dirty air enters the filter through the inlet tubes and begins centrifugal motion by contacting spinners. Inertial force causes the air to continue through the filter while the contaminants are separated from the air-stream. The contaminants are removed by suction through a bleed air duct. The suction is provided by a blower providing approximately 10% of inlet flow.

 
PO78 Inertial Spin element

 

PO78 Inertial Spin tube

Second stage and third stage elements
Second and third stage elements can be any combination of Industrial Filter Manufacturers high efficiency filters  used in the AFP Single Stage Series, AFP Two Stage Series or AFPA Two Stage series, depending on desired efficiencies.

 

Industrial Filter Manufacturers, Inc. 2002 CCBot/1.0 (+http://www.commoncrawl.org/bot.html)

Industrial Filter Manufacturers
10244 Hedden Rd.
Evansville, IN 47725
phone: (812) 867-4730 fax: (812) 867-4744
e-mail: ifm@ifm1.com